Follow these steps:
– Make sure the floor is clean, dry, and leveled.
– Measure and mark the application area.
– Position the vinyl without removing the backing paper.
– Gradually peel off the liner and apply the sticker with a felt spatula, pressing from the center outward.
– At the end, apply heat with a hot air gun and press firmly to ensure maximum adhesion.
Check our full installation guide for more details.

GymStickers are compatible with all rubber floors and MultiFlex vinyl roll.
Just make sure the surface is clean, dry, and free of imperfections.

Yes! GymStickers can also be applied to smooth walls.
Customize your design and turn your walls into functional or decorative elements.

The vinyl needs up to 72 hours to fully set.
Avoid washing the floor during this period.

Clean gently and regularly:
– Use a vacuum to remove dust and debris
– For deeper cleaning, use a microfiber strip mop and a neutral pH detergent
Avoid scrubbing directly over the vinyl to preserve the design.

When applied correctly and maintained properly, GymStickers are highly durable.
Heat applied during installation helps reinforce adhesion.

No. Once the vinyl is applied, it’s not recommended to remove and reapply it.
That’s why it’s important to mark the application area carefully beforehand.

Yes, they can be removed with care.
If you’re replacing them, make sure to clean the surface thoroughly before applying a new set.