> Decoration > COB LED Strip

COB LED Strip

Continuous light for indirect lighting

4.9/5 from over 930 satisfied customers on Google

The COB LED strip creates a continuous line of light, without the visible dots of conventional LED strips.

It suits indirect lighting in ceiling coves, under counters, behind shelving and on other interior features, where the light source needs to stay out of sight.

The self-adhesive backing makes it straightforward to fit on a clean, smooth and dry surface, and the strip can be trimmed at the marked cutting points. It comes in warm white 3000K, for a welcoming feel, or RGB, for colour changes by remote.

With IP20 protection, it is intended for dry interiors.

For areas exposed to splashes, moisture or sheltered outdoor use, see the Neon LED strip versions with IP65 or IP67 protection.

Fill in the form below. A Geometrik specialist will contact you.

Colours

3000K

RGB

Main Benefits

Light without dots

The continuous chip gives an even line, without the dots of standard strips

Self-adhesive fixing

Makes fitting straightforward on a clean, smooth and dry surface

Low consumption

Efficient decorative lighting for extended use

Cuts to size

At the marked points, to match the length of the area

Why choose a COB LED strip for your gym?

A well-lit gym gets noticed without anyone knowing why. The difference is rarely the ceiling light alone; it is also the indirect lighting that runs along a counter, up a cove or frames the reception. That kind of light is what makes a space look considered, and it is what the COB LED strip is for.

Light without seeing where it comes from

Older LED strips show a row of dots, and around a counter edge or in a cove that ruins the effect. The COB has a continuous chip from end to end, so the light comes out as one whole line. Hidden in a channel or behind a step, it lights the area without anyone seeing the source.

Fits without work

The strip is self-adhesive: clean and degrease the surface, apply the strip and trim the length only at the marked cutting points. Power supply and connections should follow the manufacturer’s instructions.

3000K or RGB, which one?

The 3000K version gives fixed warm white light, the kind that warms up a reception or a lounge area. It is the choice when you want atmosphere and you do not want to keep adjusting it.

The RGB version changes colour by remote. It suits anyone who wants to play with brand identity, mark a class with a colour or shift the mood by time of day. More flexibility, at the cost of one more controller to manage.

COB LED strip or Neon LED strip?

What decides it is where you are installing and whether the light is meant to be hidden or seen.

	COB LED strip	Neon LED strip
Type of light	Diffuse line, to hide	Defined, visible line
Best for	Coves, counters, shelving	Outlines, walls, light runs
Protection	IP20, dry interior	IP65 to IP67
Wet areas	No	Yes, with correct sealing

In short: choose the COB LED strip for indirect lighting with the source hidden, in dry interiors. Choose the Neon LED strip when you want a visible line of light and need higher protection against moisture, depending on the version and the installation.

Technical details

Colours

3000K, RGB

Type

Self-adhesive COB LED strip

Lengths

5 m | 10 m

Width

10 mm

Versions

3000K (warm white) │ RGB

Fixing

Self-adhesive

Protection rating

IP20 (dry interior)

Includes

3000K: strip, controller, remote and power supply │ RGB: strip, RGB controller and power supply

Colour control

RGB by remote; no colour control on the 3000K version

Application environment

Dry interior

Note

Not suitable for changing rooms, showers or wet areas

Installation and maintenance of COB LED Strip

Clean and degrease the surface, which needs to be dry and smooth. Measure the area, test the strip powered up before sticking it down, and only then apply it. If the adhesion needs backing up, use double-sided tape.

Yes, only at the marked cutting points. Cutting anywhere else damages the circuit.

On gentle curves yes. Do not bend it at a sharp angle or crease it, as this breaks the circuit. For sharp corners, cut and use a connector.

No. The COB is IP20, for dry interiors. For changing rooms, showers or outdoors, use the Neon LED strip.

No. The power supply must sit in a dry, ventilated spot and never be covered while in use.

Disconnect from the mains, clean with a soft dry cloth, and avoid abrasive products or solvents.

No periodic maintenance needed. Check now and then that the connections are still properly insulated.