> Gym Flooring > Trail15HD


Fill in the form below. A Geometrik specialist will contact you.
Roll dimension (WxH)
1m x 5m | 1m x 10m | 1m x 15m | 1m x 20m | 2m x 5m | 2m x 10m | 2m x 15m | 2m x 20m

Suitable for

CrossFit/Cross Training
Multi-sports areas
Sprint Tracks

Main Benefits

Intense sports play

High resistance

Move in different directions safely

Traction/sliding properties


Excellent cost-benefit ratio

Outdoor installation

Resistant to UV rays and has excellent drainage

Trail15HD provides

1. Value for money

Installing a floor surface at a sports venue does not have to be an expensive investment. Trail15HD is an affordable, highly resistant solution that will without doubt bring benefits to your training.

2. Moving in different directions safely

The need for stability provided by the surface is an important safety factor for sport’s people when doing traction exercises that involve changes in direction or sprinting. Trail 15HD enables excellent traction-sliding, ensuring adherence to the surface and comfort.

3. Easy to install and maintain

The ease of installation and maintenance are factors that should always taken into account when acquiring a new flooring. Artificial grass is a surface that comes in a roll which is easy and quick to install and that can be put on any level and compact base. Suitable for indoor and outdoor applications.

Technical details

Blue, Green, Red
Backing: Polypropylene mesh with SBR Resin/Latex | Filament: Polyethylene grass with UV stabilisation
Strand density (Dtex)
Nº of points/m2
Roll dimension (WxH)
1m x 5m | 1m x 10m | 1m x 15m | 1m x 20m | 2m x 5m | 2m x 10m | 2m x 15m | 2m x 20m
Roll weight
1m x 5m – 10,5kg | 1m x 10m – 21kg | 1m x 15m – 31,5kg | 1m x 20m – 42 kg | 2m x 5m – 21kg | 2m x 10m – 42 kg | 2m x 15m – 63kg | 2m x 20m – 84 kg
Type of installation / placement
Double-sided adhesive tape | Bicomponent glue | Clamps
Installation environment
Indoors and outdoors
Indoors: Clean with broom or vacuum cleaner | Outdoors: Sweep and wash with a lot of water
Legal guarantee for manufacturing defects (please enquire)

Installation and maintenance of Trail15HD

Artificial grass can be installed in different ways:

Indoor – For non-permanent facilities, such as rented premises, the flooring can be installed using double-sided adhesive tape.

For permanent premises, it can be fixed using a bicomponent glue.

Outdoor – For cement bases, it can be installed with a bicomponent glue directly onto the base.

For earth or gravel grounds, it should be installed using bicomponent glue on top of a mesh. To fix the edges, several systems can be used, such as clamps or creating a cement perimeter where you can glue the grass using bicomponent glue.

When installing the different rolls, make sure the strands are all pointing in the same direction. Also check that the joints are as tight as possible to reduce their visibility in the final result.

The artificial grass should be cut from its base (black underlay). To do so, the roll should be positioned upside down, with the grass at the bottom, cutting the black underlay directly.

The artificial grass can be installed on any kind of ground, as long as it is compact, level, clean and dry.

Clean off the dirt using a leaf blower, broom or hosepipe with running water.

For indoor venues, a vacuum cleaner can be used to remove the dirt.

This product is appropriate for indoor and outdoor installation.

The artificial grass has channels that allow the water to flow off it. Nevertheless, the draining of the venue should be planned and designed for the specific ground.

No. The backing of the grass prevents light from passing through. Without light, weeds do not grow. If you add a weed-control mesh, you will be duplicating the work and spending more.

Still have doubts about installation and maintenance?

Projects with Trail15HD